EU Declaration of Conformity: What Amazon Sellers Need to Know

This post is by Ferry Vermeulen of INSTRKTIV.

When selling certain products on Amazon in Europe, the platform requires you to submit a Declaration of Conformity. A Declaration of Conformity (or DoC) proves that the product complies with European product safety legislation.

Depending on the EU directives that apply to your product, there are different requirements on the content of the Declaration. Amazon is very strict and only approves products that include a compliant Declaration. They often decline products without giving a reason, so the seller has to work out what’s missing for themselves.

This article will explain what a Declaration of Conformity is, when you need one, and how you can draft and submit a compliant DoC.

What is a Declaration of Conformity?

The Declaration of Conformity formally declares that a product complies with the relevant European product health and safety directives. The manufacturer must draw up and sign the DoC. By doing so, the manufacturer takes full responsibility for the product’s compliance with applicable product safety legislation.

The DoC is the last step in the CE marking process and only applies to products that fall within the scope of CE marking. See What are the steps towards EU compliance? below for more information about the CE marking process.

What kind of products require a Declaration of Conformity?

All products that are subject to CE marking require a Declaration of Conformity. CE marking is mandatory for certain product categories that are sold within the European Economic Area. These include, amongst others, electronics, toys, sunglasses and mechanical fitness equipment.

Toys, for example, must comply with the Toy Directive. Electronics need to comply with the EMC, RoHS and possibly the LVD Directive. Sunglasses fall within the scope of the Directive on Personal Protective Equipment.

Simple fitness equipment such as kettlebells and resistance bands are not subject to CE marking. However, most cardio fitness equipment, such as treadmills, bikes, steppers, cross-trainers and climbers are governed by European CE Directives such as the Machinery Directive, EMC, LVD RoHS and/or ErP Directive. Several directives may apply to a single product.

All these products can only legally be placed on the market when they have been tested, have a complete technical file, and bear a CE mark to demonstrate compliance with the relevant directives and harmonized standards.

When does Amazon ask sellers for a Declaration of Conformity?

Certain products, including most regulated within the European Union, are classified by Amazon as requiring “pre-approval”. These products include, but are not limited to, kitchen equipment, toys, lighting, batteries and chargers. For these, Amazon requires you to upload the Declaration of Conformity before the product can be sold.

To request pre-approval, you should do the following:

  1. Go to Catalog > Add Products in Seller Central.
  2. Enter the ASIN or other product code in the search box.
  3. Click Listing Limitations apply and Request Approval under the product information.
  4. Upload the required documentation.
  5. Submit the application.

Within a few days, Amazon will either approve your application or reach out for more information.

If you don’t request approval up front, Amazon can stop you selling the product at any time and request the Declaration of Conformity be uploaded. If you don’t have one, or they do not accept it, you will not be able to sell the product again.

Why does Amazon ask for a Declaration of Conformity?

Amazon wants to ensure that only safe products are sold on their marketplace. They also want to make you aware of the fact that you, as the seller, are fully responsible for the product. It is the seller who should make sure that the product complies with all relevant safety regulations.

In fact, as soon as you import products into the European Union, you should already include a copy of the DoC with the product, or hand it over to customs upon request. Customs can hold products if they do not contain a compliant declaration.

Products which are NOT regulated by CE marking directives (for example inflatable beds, pens and furniture), must still comply with the General Product Safety Directive, requiring that all products placed on the European market should be safe. Amazon’s terms also require sold products to be safe and comply with national product regulations.

How do you get a Declaration of Conformity for a branded product?

When you sell a branded product from another company, you are seen as a distributor of the product within the European Union. A distributor can be any business, including a retailer or wholesaler, that acquires products for further distribution. They may have sourced these products from another distributor, an importer or directly from the manufacturer.

It is the responsibility of the distributor, before making a product available on the market, to verify that:

  1. The product bears the required conformity markings, such as CE marking.
  2. The relevant documents are included with the product e.g. the Declaration of Conformity, user instructions and safety information.
  3. The product shows the name of the manufacturer or importer, their registered trade name or trademark, product type, batch or serial number, and the address at which they can be contacted.

Sometimes it is not possible to include the information above on the product itself, for example due to the product’s size or the type of material it is made from. In this case, the information can be included on the product’s packaging and/or in the user instructions.

So, for all branded products, you as the distributor should make sure that the products are accompanied by a compliant Declaration of Conformity. When selling the product on Amazon, upload the DoC when requested during the pre-approval process.

How do you get a Declaration of Conformity for your own brand or private label product?

When you have your own brand or private label product and sell it within the EU, you are legally seen as the manufacturer of the product. Therefore it is your responsibility to ensure that the product complies with all relevant legislation.

This means that you must draw up the Declaration of Conformity, declare that the product complies and take full responsibility. Depending on the type of product, there are different requirements for the content of the DoC.

To draw up a compliant Declaration of Conformity:

  1. Make sure that your product complies. See below.
  2. Determine the applicable directives for your product.
  3. Download a free DoC template for your main directive.
  4. Fill in the template.

The DoC needs to be signed by the person who placed the product on the European market. A DoC signed by a Chinese manufacturer, for example, would not be accepted!

What are the steps towards EU compliance?

As discussed previously, the Declaration of Conformity is just the last step in the CE marking process. By signing it, you declare that the product meets all requirements of the relevant CE Directives.

So what does the CE marking process look like? It always consists of the following six steps:

Graphic
Graphic
  1. Identify the applicable directives and harmonized standards.
  2. Find the product-specific requirements of each applicable directive.
  3. Decide whether an independent conformity assessment (by a notified body) is necessary.
  4. Test the product and check its conformity.
  5. Compile and keep available the technical file. Each directive has different requirements on the content of the technical file.
  6. Add the CE mark and draw up the EU Declaration of Conformity.

If you have any questions about CE Marking and the Declaration of Conformity, please let me know in the comments.

This post was by Ferry Vermeulen, Founder of INSTRKTIV.

INSTRKTIV helps exporters, importers, distributors, designers and manufacturers of products to develop compliant documentation and also supports them in the certification process. Ferry has also written about creating compliant user instructions.

Author

Jake Pool

Jake Pool

A content writer in the SaaS, FinTech, and eCommerce spaces, Jake Pool has written hundreds of articles and reviews for dozens of corporate blogs and online publications. With four years under his wing, readers can expect many more informative articles in the future.

Show all posts from

Comments

PETER RUMBLES
PETER RUMBLES

Hi Ferry,

Thank you for this article. I have been over to your website. If we gave you pictures of a product, and a description of it, would you be able to tell us which EC Directives it would come under, and which Template we would need to buy for it from your Shop section? Would you charge for this advice?

Ferry Vermeulen
Ferry Vermeulen
In reply to Ferry Vermeulen

Hi Peter. Thanks for your message. Could you send the pics and the description to [email protected]?

Dmitry Volskiy
Dmitry Volskiy

Hello and thank you for the article. i need help with declaration of conformity for wireless car charger. I am selling on amazon. I cannot pass the UK marketplace - they say: not all applicable standards are indicated. So in fact i only need the list of all applicable standards for wireless car charger. Can you tell me how I get find them?

Ferry Vermeulen
Ferry Vermeulen
In reply to Ferry Vermeulen

Hi Dmitry. There is not one source where you can find all standards, but there are a few places where you can try to find them:
-The website of the European Commission. Select a product group and on the next page see if some relevant standards are listed.https://instrktiv.com/en/harmonised-standards/
-Search on the website of normalisation institutes, such as DIN, BS, ISO, IEC, NEN and SIS, by using key words
-Google on for example 'standard + product'
-Search the Official Publication Journal of the European Community.

Akin
Akin

Thanks for this info.

I have registered at the CeE mark done all the require questionnaire but to print the certificate itself cost a huge lot money. can the template above used instead of making payment and how do we get the template download after subscribing to your newsletter?

Ferry Vermeulen
Ferry Vermeulen
In reply to Ferry Vermeulen

Can you send me some more information such as where exacftly you registred and some product images or a /url at [email protected]?

Shane
Shane

Thanks for this article.
Unfortunately last year our products where being suppressed due to conformity issues. We uploaded all documentation and they were approved and reinstated. However, these where batches of products and they could be down time of up to 3 days. = loss of revenue.
I am looking into a pre approval method to avoid Amazon suppressing any of our products.
I followed the above below instructions, however when I click the Listings Limitations Apply button, I cannot see the Request Approval under the product information.Any ideas?

o request pre-approval, you should do the following:

Go to Catalog > Add Products in Seller Central.
Enter the ASIN or other product code in the search box.
Click Listing Limitations apply and Request Approval under the product information.
Upload the required documentation.
Submit the application.

Ferry Vermeulen
Ferry Vermeulen

Hi Shane. Are you talking about Amazon's instructions that you followed? I have no experience with that. You can shoot me an email at [email protected] with more info if you like. Happy to help!

Nick M
Nick M

Hi,

Will amazon ask to only see the DoC certificate or will retailers/manufacturers be required show compliance through test reports and a technical file?

Leave a Reply to Ferry Vermeulen Cancel reply

Your email address will not be published. Comments are subject to our Terms of Use.
Please enter the correct answer below as a way to filter out some bots.